Asus SABERTOOTH Z170 MARK 1 - Page 127

SABERTOOTH Z170 MARK 1
4-3
Chapter 4
Method 2: Using a modified Windows
®
7 ISO
LoadUSB3.0driversandinstallWindows
®
7usingamodiedWindows
®
7installationDVD.
Requirement:
• 1xASUSsupportDVD
• 1xWindows
®
7installationsource
• 1xWorkingsystem(PCornotebook)
• 1xSATAODD
1. Onyourworkingsystem,createanISOimageleoftheWindows
®
7installation
sourceusingathird-partyISOsoftware.
2. Copyboth“Auto_Unattend.xml”and“Auto_Unattend”folderfromtherootdirectoryof
theASUSsupportingDVDtoyoursystem.
3. EdittheISOleandaddboth“Auto_Unattend.xml”and“Auto_Unattend”folderintothe
ISOle.
4. BurnthisISOleontoanemptyDVDtocreateamodiedWindows
®
7installation
DVD.
5. InsertthemodiedWindows
®
7installationDVDintoanODDonyour100series
platform.
6. PoweronyoursystemandpressF8duringPOST(Power-OnSelfTest)toenterthe
bootscreen.
7. SelecttheODDasthebootdevice.
8. TheUSB3.0driverwillbeloadedautomaticallyduringinstallationstartup.
The“Setupisstarting...”screenwillshowupiftheUSB3.0driverisloadedcorrectly.
9. FollowtheonscreeninstructionstocompletetheWindows
®
7installation.