2-34
Chapter 2: Hardware information
Chapter 2
4. Install the assembled fan and sponge
to the rear I/O fan socket, and screw
the I/O fan cover lid to close.
The TUF logo must be visible along
with the I/O ports.
5. Place the fan cable inside the cable
slot, and connect the fan cable to the
assistant fan (ASST_FAN1) connector
on the motherboard
Keep the fan cable hidden under
the thermal armor to prevent clutter.
1. Remove the fan cover lid to show the
fan socket and the fan connector.
Installing the second accessory fan:
To Next Page
Loading...
