Asus SABERTOOTH Z77 - Offset Mode Sign

ASUS SABERTOOTH Z77
3-17
Chapter 3
iGPU Current Capability [100%]
Allows you to set the iGPU Current Capability.
Conguration options: [100%] [110%] [120%] [130%] [140%]
DO NOT remove the thermal module while changing the DIGI+ VRM related parrameters .
The thermal conditions should be monitored.
Some of the following items above are adjusted by typing the desired values using the
numeric keypad and press the <Enter> key. You can also use the <+> and <-> keys to
adjust the value. To restore the default setting, type [auto] using the keyboard and press the
<Enter> key.
DRAM Current Capability [100%]
Allows you to set the DRAM Current Capability to a higher value for a wider total power
range, and extends the overclocking frequency range.
Conguration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [Auto]
Allows you to adjust the DRAM switching frequency.
Conguration options: [Auto] [Manual]
DRAM Power Phase Control [Auto]
Allows you to set the tuning prole
[Auto] Sets the default conguration.
[Optimized] Sets the ASUS optimized phase tuning prole.
[Extreme] Sets the full phase mode.
DRAM Power Thermal Control [110]
Allows you to set a higher temperature for a wider DRAM power thermal range, and
extends the overclocking tolerance for overclocking potential.
Press <+> or <-> to set a value.
DO NOT remove the thermal module. Thermal conditions must be monitored regularly.
CPU Voltage [Offset Mode]
[Manual Mode] Allows you to set a xed CPU voltage.
[Offset Mode] Allows you to set the Offset voltage.
Offset Mode Sign [+]
This item appears only when you set the CPU Voltage item to [Offset Mode].
[+] To offset the voltage by a positive value.
[–] To offset the voltage by a negative value.
CPU Offset Voltage [Auto]
This item appears only when you set the CPU Voltage item to [Offset Mode] and
allows you to set the Offset voltage. The values range from 0.005V to 0.635V with a
0.005V interval.