Asus SABERTOOTH Z77 - System Agent Configuration

3-26
Chapter 3: BIOS setup
Chapter 3
3.5.4 System Agent Conguration
Memory Remap Feature [Enabled]
[Enabled] Allow you to enable remapping the memory above 4GB.
[Disabled] Disables this function.
Graphics Conguration
Allows you to set the graphics conguration for primary display, iGPU memory, render
standby, and iGPU initiation functions.
Primary Display [Auto]
Allows you to select the IGFX/PEG graphics device for primary display.
Conguration options: [Auto] [IGFX] [PEG]
iGPU Memory [64M]
Allows you to select a pre-allocated graphics memory size to be used by the internal
graphics device.
Conguration options: [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M] [288M]
[320M] [352M] [384M] [416M] [448M] [480M] [512M] [1024M]
Render Standby [Enabled]
Allows you to enable or disable the rendered standby support.
Conguration options: [Enabled] [Disabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable the iGPU Multi-Monitor. Set this item to [Enabled] to
activate the Lucid Virtu Universal MVP support function for empowering both integrated
and discrete graphics.
Conguration options: [Enabled] [Disabled]
NB PCIe Conguration
Allows you to congure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
PCIEX16_2 Link Speed [Auto]
Conguration options: [Auto] [Gen1] [Gen2] [Gen3]
Main
Ai Tweaker
Advanced Monitor Boot Tool
Enable or disable memory remap above
4G.
Back Advanced\ System Agent Conguration >
UEFI BIOS Utility - Advanced Mode
System Agent Bridge Name IvyBridge
Memory Remap Feature Enabled
> PCH Conguration
> NB PCIe Conguration