Asus SABERTOOTH Z97 MARK 2/USB 3.1 - Page 49

ASUS SABERTOOTH Z97 MARK 2/USB 3.1
1-35
Chapter 1
• Forafullyconguredsystem,werecommendthatyouuseapowersupplyunit
(PSU)thatcomplieswithATX12VSpecication2.0(orlaterversion)andprovidesa
minimum power of 350 W.
• DONOTforgettoconnectthe4-pin/8-pinEATX12Vpowerplug.Otherwise,the
system will not boot.
• WerecommendthatyouuseaPSUwithahigherpoweroutputwhenconguringa
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
• Ifyouwanttousetwoormorehigh-endPCIExpressx16cards,useaPSUwith
1000W power or above to ensure the system stability.
8. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designedtottheseconnectorsinonlyoneorientation.Findtheproperorientationand
pushdownrmlyuntiltheconnectorscompletelyt.