Asus STRIX X99 - Page 101

ASUS STRIX X99 GAMING
3-33
Chapter 3
Setup Mode [EZ Mode]
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS
after POST.
[EZ Mode] This item allows you to go to EZ Mode of the BIOS after POST.
CSM (Compatibility Support Module)
This item allows you to congure the CSM (Compatibility Support Module) items to fully
support the various graphics, bootable devices, and add-on devices for a better compatibility.
Launch CSM [Enabled]
[Auto] The system will automatically detect the states of bootable devices
and the add-on devices for CSM support.
[Enabled] For a better compatibility, enable the CSM to fully support the non-
UEFI driver add-on devices or the Windows
®
UEFI mode.
[Disabled] Disable the CSM to fully support the Windows secure update and
secure boot.
The following items appear only when you set the Launch CSM to [Enabled].
Boot Device Control [UEFI and Legacy OPROM]
This item allows you to select the devices boot-up mode by the devices
specication.
Conguration options: [UEFI and Legacy OPROM] [Legacy OPROM only]
[UEFI only]
Boot from Network Devices [Legacy only]
This item allows you to select the type of the onboard LAN controllers and
installed LAN cards.
Conguration options: [Ignore] [Legacy only] [UEFI driver rst]
Boot from Storage Devices [Legacy only]
This item allows you to select the type of storage devices that will run rst
during the system boot.
Conguration options: [Ignore] [Legacy only] [UEFI driver rst]
Boot from PCI-E/PCI Expansion Devices [Legacy only]
This item allows you to select the type of PCI-E/PCI expansion devices that
will run rst during the system boot.
Conguration options: [Legacy only] [UEFI driver rst]