Asus STRIX X99 - Page 99

ASUS STRIX X99 GAMING
3-31
Chapter 3
Water Pump Control [Disabled]
This item allows you to set Water Pump Control.
Conguration options: [Disabled] [Auto] [DC Mode] [PWM Mode]
HAMP Fan Control [Auto]
This item allows you to set HAMP Fan Control.
Conguration options: [Disabled] [Auto] [DC Mode] [PWM Mode]
HAMP Q-Fan Source [CPU]
This item controls the assigned fan according to the selected temperature source.
Conguration options: [CPU] [MotherBoard] [PCIEX16/X8_1 Slot] [PCIEX16_2 Slot]
[VRM] [PCH] [T_Sensor1] [Ext_Sensor1] [Ext_Sensor2]
[Ext_Sensor3] [Multiple Sources]
HAMP Fan Speed Low Limit [300 RPM]
This item allows you to select the lower speed limit for the HAMP fan.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
HAMP Fan Profile [Standard]
This item allows you to select the appropriate performance level of the HAMP fan.
Conguration options: [Standard] [Silent] [Turbo] [Manual]
Extension Fan 1/2/3 Q-Fan Control [DC Mode]
These items allow you to set the extension fan Q-Fan control feature in DC Mode, PWM
Mode, or disable the extension Q-Fan controls.
Conguration options: [Disabled] [DC Mode] [PWM Mode]