2-21ASUS T3-M2NC51PV
2.11 Replacing the cover
To replace the cover:
5. Secure the cover with the
three screws you removed
earlier.
23
1. Turn the chassis upright.
2. Position the front edge of the
cover at least two inches from
the front panel cover. Fit the
cover tabs with the chassis rail
and the front panel tabs.
3. Lower the rear edge of the
cover as shown.
4. Push the cover slightly toward
the front panel until it ts in
place.
2
3
4
4
4
To Next Page
Loading...
