Asus V230IC - Assembling the Base

ASUS All-in-One PC
21
Chapter 2:
Using your ASUS All-in-One PC
Assembling the base
1. Place the ASUS All-in-One PC on a at and stable surface such as
a table or desk.
2. Align and attach the base to the stand. Ensure that the stand is
tted rmly and aligned properly to the base.
NOTE: The stand ts to the base in one orientation only.
3. Secure the base to the stand with the bundled screw using a
Phillips or a at screwdriver. You can also use a coin or token.
base
stand
screw
NOTE: The illustration above is for reference only. The actual base of your
AiO may vary depending on the model but the installation steps remains
the same.