Asus VA24DQF - Assembling the Monitor Arm;Base

2-1ASUS VA24DQF / VA27DQF LCD Monitor
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Place the arm hinge of the stand assembly onto its compartment on the rear
of the monitor.
3. Attach the base into the arm, making sure the tab on the arm ts into the
groove on the base.
4. Fix the base to the arm by rotating the base until it ts into place.
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2
1
Hinge screw size: M4 x 8 mm.