2-1
ASUS LCD Monitor VA24ECPSN Series
2.1 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Remove the four (4) screws securing the arm to the rear of the
monitor.
3. Detach the stand (arm and base) from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
2
1
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg (Screw
size: M4 x 8.0 mm).
To Next Page
Loading...
