Asus VE276 Series - Detaching the Monitor Stand

2-1 Chapter 2: Setup
2.1 Detaching the arm/stand
(for VESA wall mount)
ThedetachablestandoftheVE276SeriesLCDmonitorisspeciallydesignedfor
VESAwallmount.
To detach the arm/stand:
1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor
face down on a clean table.
2. Useascrewdrivertoremovethe two screws that secure the stand to the
monitor.
3. Detach the stand from the monitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damage to the monitor.
• Holdthestandofthemonitorwhileremovingthescrews.
• TheVESAwallmountkit(100x100mm)ispurchasedseparately.
• UseonlytheULListedWallMountBracketwithminimumweight/load
24.4kg(Screwsize:4x10mm).