Asus VG275 Series - 2.4 Connecting the Cables; 2.5 Turning on the Monitor

2-4 Chapter 2: Setup
2.4 Connectingthecables
Connect the cables as the following instructions:
• Toconnectthepowercord:
a. Connect the power adapter securely to the monitor’s DC input.
b. Connect one end of the power cord to the power adapter and the other
end to a power outlet.
• ToconnecttheVGA/HDMI/DisplayPortcable:
a. Plug one end of the VGA/HDMI/DisplayPort cable to the monitor’s VGA/
HDMI/DisplayPort port.
b. Connect the other end of the VGA/HDMI/DisplayPort cable to your
computer's VGA/HDMI/DisplayPort port.
c. Tighten the two screws to secure the VGA connector.
• Toconnecttheaudiocable:connect one end of the audio cable to the
monitor’s Audio-in port, the other end to the computer’s audio-out port.
• Tousetheearphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI or DisplayPort signal is fed.
2.5 Turningonthemonitor
Press the power button . See page 1-2 for the location of the power button. The
power indicator
lights up in white to show that the monitor is ON.