Asus VG279QL3A Series - Detaching the Arm;Stand

2-2
Chapter 2: Setup
2.2 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Remove the four (4) rubber pad and screws securing the arm to the
rear of the monitor.
3. Detach the stand (arm and base) from the monitor.
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
5
1
2
3
4
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg
(Screw size: M4 x 10.0 mm).