Asus VG279QL3A Series - OSD Function Introduction

3-2
Chapter 3: General Instruction
3.1.2 OSD Function Introduction
1. Gaming
This function contains six sub-functions that you can select for your
preference.
Image
50
Back Enter Exit
Variable OD 60
Variable Refresh Rate
ELMB Setup
GamePlus
GameVisual
Shadow Boost
Color
Input Select
MyFavorite
ASUS TUF GAMING
VG279QL3A
1920 x 1080
GameVisual
Input Select
HDR
Racing Mode
HDMI-2
OFF
180Hz
Gaming
• Variable OD: The adjusting range is from 0 to 100.
• Variable Refresh Rate: Allow an Adaptive-Sync supported graphics
source to dynamically adjust display refresh rate based on typical content
frame rates for power efficient, virtually stutter free and low-latency
display update.
• For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
• ELMB Setup: Check to decrease motion blur and minimize ghosting
part when on-screen objects are fast moving. ELMB is disabled if input V
frequency less than 85Hz.
• GamePlus: Activate FPS Counter, Crosshair, Timer, Stopwatch or
Display Alignment function.
• GameVisual: This function contains eight sub-functions that you can
select for your preference.
• Shadow Boost:Dark color enhancement adjust monitor gamma curve to
enrich the dark tones in an image making dark scenes and objects much
easier be found.
• In the Racing Mode, the Saturation and ASCR functions are not user-
configurable.
• In the sRGB Mode, the Saturation and Color Temp. are not user-configurable.
• In the MOBA Mode, the Saturation and ASCR functions are not user-
configurable.