Asus VG27AQ3A Series - Setting Up Your ASUS Monitor; Assembling the Monitor Stand

2-1
ASUS TUF Gaming Monitor VG27AQ3A Series
2.1 Assembling the monitor arm/base
To assemble the monitor base:
1. Have the front of the monitor face down on a table.
2. Place the arm hinge of the stand assembly onto its compartment on
the rear of the monitor.
3. Attach the base into the arm, making sure the tab on the arm ts into
the groove on the base.
4. Fix the base to the arm by fastening the bundled screw(s).
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
1
2
1
2
2
1
• Hinge screw size: M4 x 8 mm.
• Base screw size: M6 x 16.2 mm.