Asus VG34VQL3A Series - Monitor Introduction

1-2 Chapter 1: Product introduction
1.3 Monitor introduction
1.3.1 Front view
1 2 3
- Move the button up/down to select and press to confirm the function
needed.
1. button：
• Exits the OSD menu item.
• Displays the input selection bar when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
• This is a shortcut key. The default setting is Input Select .
• Toggles the Key Lock function between on and off with a long press for 5
seconds.
2. 5-wa y button:
• Turn on the OSD menu. Enact the selected OSD menu item.
• Increase/Decrease values or moves your selection up/down/left/right.
3. Turns on the OSD menu. Enacts the selected OSD menu item.
4. Close Button: Exit the OSD menu or move to the previous menu or
Turns on the OSD menu.
5. Shortcut1 Button: This is a shortcut key. The default setting is GamePlus.
- Activate Crosshair, Timer, Stopwatch,FPS Counter, or Display Alignment
function.