EasyManua.ls Logo

Asus VivoMini VC66-C2 - Removing the Top Cover

Asus VivoMini VC66-C2
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
VC66-C2
IMPORTANT!
It is recommended that you install or upgrade the memory
modules, wireless card, and solid state drive (SSD), under
professional supervision. Visit an ASUS service center for further
assistance.
Ensure that your hands are dry before proceeding with the rest
of the installation process. Before installing any of the features in this
guide, use a grounded wrist strap or touch a safely grounded object
or metal object to avoid damaging them due to static electricity.
NOTE: The illustrations in this section are for reference only. The slots
may vary depending on model.
1. Turn o your VivoMini then disconnect all cables and peripherals.
2. Place the VivoMini on a at stable surface, with its bottom side facing
up.
3. Using a at-head screwdriver or straightened paper clip, remove the
rubber feet from the sockets, then remove the four (4) screws securing
the top cover.
Removing the top cover

Table of Contents

Related product manuals