VC66-C2
37
Installing the wireless card
1. Remove the top cover and HDD layer, please refer to Removing the
top cover and Removing the HDD layer for more information.
2. (optional) Remove the M.2 SSD if an M.2 SSD is installed. To remove
the M.2 SSD, remove the screw from the screw hole, then remove the
M.2 SSD.
3. Align and insert the wireless card into its slot inside the VivoMini, then
secure it with a screw.
4. (optional) Connect the antennas to your wireless card, then use the
cable clips to organize the antenna.
To Next Page
Loading...
