Asus VN248H - Assembling the Monitor Stand; Connecting Video and Audio Cables

1-2
Chapter 1: Product Introduction
1.3 Assembling the monitor base
1. Attach the base to the arm.
2. Beware to align the latch to the notch on the base.
3. The end of the arm will slightly protrude from the base. No need to
push it in.
4. Screw the base to the arm tightly.
4
2
1
3
• Werecommendthatyoucoverthetablesurfacewithsoftclothtoprevent
damagetothemonitor.
1.4 Connect cables
Connectthecablesyouneedbasedonchapter1.5.2,page1-5.
• Flip upward the IO port cover to connect cables. After connected cables,
replacethecoverandcarefullypushitupwardtoitsoriginalpositionwithboth
thumbs at both sides of the cover.