Asus VP228 Series - Page 12

1-5
ASUS LCD Monitor VP2
28
Series
3. MENU Button:
• Press this button to enter the OSD menu.
4. Close Button
• Exit the OSD menu.
5. Input Select Button:
• Use this hotkey to switch from VGA, DVI, HDMI(Only VP228H) input
signal.
6. Shortcut key1
• This is a Shortcut key. The default setting is Brightness.
7. Shortcut key2
• This is a Shortcut key. The default setting is Blue Light Filter.
8. Auto Button
• Auto Adjust.: Automatically adjust the image to its optimized position,
clock, and phase.