Asus VP28U Series - Image Settings

3-5
ASUS LCD Monitor VP28U Series
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, Adaptive-Sync/FreeSync from this main function.
Image
Sharpness
VividPixel
ASCR
Aspect Control
Trace Free
Standard Mode HDMI 1920x1080@60Hz
ASUS VP28U
Adaptive-Sync/FreeSync
• Sharpness: Adjusts the picture sharpness. The adjusting range is from
0 to 100.
• Trace Free: Speeds up the response time by Over Drive technology. The
adjusting range is from lower 0 to faster 100.
• Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “Overscan”.
• VividPixel: ASUS Exclusive Technology that brings lifelike visuals for
crystal-clear and detail-oriented enjoyment. The adjusting range is from
0 to 100.
• ASCR: Select ON or OFF to enable or disable dynamic contrast ratio
function.
• Adaptive-Sync/FreeSync: It can allow a Adaptive-Sync/FreeSync
supported graphics source to dynamically adjust display refresh rate
based on typical content frame rates for power efficient, virtually stutter
free and low-latency display update .
• 4:3 is only available when input source is in 4:3 format。OverScan is only
available for the HDMI input source.