Asus VX207 series - Color and Image Adjustments

3-2
Chapter 3: General Instructions
• In the Standard Mode, the ASCR, Saturation ,Sharpness functions
and Skin Tone are not user-configurable.
• In the sRGB Mode, the Saturation, Color Temp., Skin Tone,
Sharpness, Brightness, Contrast and ASCR functions are not user-
congurable.
 
You can adjust Brightness,
Contrast, Saturation, Color Temp.,
Skin Tone and Smart View from
this menu.
 : the adjusting
range is from 0 to 100.
is a hotkey to activate
this function.
 : the adjusting range is from 0 to 100.
 : the adjusting range is from 0 to 100.
 : contains four modes including Cool, Normal, Warm, and
User Mode.
 : contains three color modes including Reddish, Natural, and
Yellowish.
 : provides better display quality under big viewing angle.
In the User mode, colors of R (Red), G (Green), and B (Blue) are user-
configurable; the adjusting range is from 0-100.
 
You can adjust Sharpness,
Aspect Control, ASCR, Position
(VGA only) and Focus (VGA only)
from this menu.
 : the adjusting
range is from 0 to 100.
 : adjusts the
aspect ratio to “Full” or “4:3”.
 : turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
 : adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
 : reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.