Asus X99-E WS/USB 3.1 - 4.6 ASUS Dr. Power Utility

4-20
Chapter 4: Software Support
Chapter 4
4.6 ASUS Dr. Power Utility
ASUSDr.Powerisamonitoringutilitythatprovidesnoticationswhenthepowersupply
isunabletoprovidesufcientpowertothesystem.Youcanchoosetoallowcontinuous
noticationsorstopmessagesfromappearinguntilthenexttimeyourebootyourcomputer.
Theutilityisusedtomonitorchangesinthepowersuppliedtothesystemthatmayaffect
performanceandsystemstability.
ASUSDr.PowerUtilityrunsonyoursystemonlywhentheDr.Powerswitchisenabled.
(Pleasereferto1.2.6 Onboard buttons and switchesforadditionaldetails).Iftheswitch
isdisabled,theDr.PowericonwillnotbeavailableontheWindows
®
noticationarea.
Installing Dr. Power Utility
ToinstallDr.Poweronyourcomputer:
1. PlacethesupportDVDintheopticaldrive.Thesetupwindowwillbedisplayedif
Autorunisenabledonyoursystem.
2. SelecttheDriverstabandthenclickortapASUS Dr. Power.
3. Followtheinstructionstocompleteinstallation.
Using Dr. Power
Afteryoucompleteinstallation,ASUSDr.PowerUtilitywillappearontheWindows
®
noticationarea.PlaceyourmousepointerovertheDr.Powericontodisplaycurrentpower
status.
Right-click onthenoticationareathenclickEvent Notificationtodisableorenable
messagesfromtheutility.
E13611_X99-E_WS_USB31_UM_V4.indb 20 10/27/2017 16:56:24