Asus X99-E WS/USB 3.1 - Installing Three SLI-Ready Graphics Cards

6-8
Chapter 6: Multiple GPU Support
Chapter 6
4. AlignandrmlyinserttheSLIbridgeconnectortothegoldngersoneachgraphics
card.Ensurethattheconnectorisrmlyinplace.
5. Connect two independent auxiliary power sources from the power supply to the two
graphics cards separately.
6. ConnectaVGAoraDVIcabletothegraphicscard.
6.2.3 Installing three SLI-ready graphics cards
Refer to the documentation that came with your graphics card package to install the device
drivers.
To install three SLI-ready graphics cards:
1. Prepare three SLI-ready graphics cards.
2. Insert the three graphics cards into the
PCIEX16 slots. If your motherboard
has more than two PCIEX16 slots,
refer to Chapter 1 in this user manual
for locations of the PCIEX16 slots
recommended for multi-graphics card
installation.
3. Ensure that the cards are properly
seated on the slots.
Goldfingers
SLI bridge
E13611_X99-E_WS_USB31_UM_V4.indb 8 10/27/2017 16:56:27