Asus Z170-P D3 - Page 58

CPU Graphics Phase Control [Auto]
ThisitemallowsyoutosetthepowerphasecontroloftheCPU.Congurationoptions:[Auto]
[Standard][Optimized][Extreme][PowerPhaseResponse]
DONOTremovethethermalmodulewhensettingthisitemto[Power Phase Response].
Thethermalconditionsshouldbemonitored.
ThefollowingitemsappearonlywhenyousettheGTPowerPhaseControlto[Power
Phase Response].
2.5.12 Internal CPU Power Management
ThesubitemsinthismenuallowyoutosettheCPUratioandtheirfeatures.
Intel
®
SpeedStep™ Technology [Enabled]
Thisitemallowstheoperatingsystemtodynamicallyadjusttheprocessorvoltageandcores
frequency,resultingtoadecreasedaveragepowerconsumptionanddecreasedaverage
heatproduction.Congurationoptions:[Disabled][Enabled]
Turbo Mode [Enabled]
Thisitemallowsyoutoenableyourcoreprocessor’sspeedtorunfasterthanthebase
operatingfrequencywhenitisbelowoperatingpower,currentandtemperaturespecication
limit.Congurationoptions:[Disabled][Enabled]
ThefollowingitemsappearonlywhenyousettheTurboModeto[Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
AllowsyoutolimittheTurboRatio’stimedurationthatexceedstheTDP(Thermal
DesignPower)formaximumperformance.Usethe<+>or<->keystoadjustthevalue.
Thevaluesrangefrom1Wto4096W.
Package Power Time Window [Auto]
AlsoknownasPowerLimit1,thisitemallowsyoutomaintainthetimewindowfor
TurboRatiooverTDP(ThermalDesignPower).Usethe<+>or<->keystoadjustthe
value.Thevaluesrangefrom1to127inseconds.
Short Duration Package Power Limit [Auto]
AlsoknownasPowerLimit2,thisitemallowsyoutoproviderapidprotectionwhen
thepackagepowerexceedsthePowerLimit1.Usethe<+>or<->keystoadjustthe
value.Thevaluesrangefrom1Wto4096W.
CPU Integrated VR Current Limit [Auto]
Allowsyoutosetahighercurrentlimittopreventfrequencyandpowerthrottlingwhen
overclocking.Usethe<+>or<->keystoadjustthevalue.Thevaluesrangefrom
0.125to1023.875witha0.125interval.
2-24 Chapter 2: Getting started