ASUS Z8NA-D6 Series 5-21
Using the Objects command
To check data consistency using the
Objects
command
1. From the
Management Menu
, select
Objects
, and then select
Virtual Drive
from the sub-menu.
2. Use the arrow keys to select the virtual drive you want to check, and then
press <Enter>.
3. Select
Check Consistency
from the pop-up menu, and then press <Enter>.
4. When prompted, use the arrow keys to select
Yes
from the dialog box to
check the drive.
5. When checking is complete, press any key to continue.
To Next Page
Loading...
