Asus Z97-A/USB 3.1 - Page 101

ASUS Z97-A/USB 3.1
2-47
2.7.4 CPU Core 0/3 Voltage, 3.3V Voltage, 5V Voltage, 12V
Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select [Ignore] if you do not want to detect this item.
2.7.5 CPU Q-Fan Control [Auto]
This item allows you to set the CPU Q-Fan operating mode.
[Auto] Detects the type of CPU fan installed and automatically switches the
control modes.
[PWM Mode] Enables the CPU Q-Fan control feature in PWM mode for 4-pin CPU fan.
[DC Mode] Enables the CPU Q-Fan control feature in DC mode for 3-pin CPU fan.
[Disabled] Disables the Q-Fan control.
The following items appear only when you set the CPU Q-Fan Control to [DC Mode],
[PWM Mode], and [Auto].
CPU Fan Speed Low Limit [300 RPM]
This item allows you to set the low limit warning for CPU Fan speed.
Conguration options: [Ignore] [200 RPM] [300 RPM] [400 RPM] [500 RPM] [600 RPM]
CPU Fan Profile [Standard]
This item allows you to set the appropriate performance level of the CPU fan.
[Standard] Set to make the CPU fan adjust automatically depending on the CPU
temperature.
[Silent] Set to minimize the fan speed for quiet CPU fan operation.
[Turbo] Set to achieve maximum CPU fan speed.
[Manual] Set to assign the detailed fan speed control parameters.
The following items appear only when you set the CPU Fan Prole to [Manual].
CPU Upper Temperature [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature. The values
range from 25°C to 75°C.
CPU Fan Max. Duty Cycle(%) [100]
Use the <+> or <-> keys to adjust the maximum CPU fan duty cycle. The values range
from 20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan
operates at the maximum duty cycle.
CPU Middle Temperature [25]
Use the <+> or <-> keys to set the value for CPU Middle Temperature. The range of
the values depends on the CPU installed.