2-40 Chapter 2: Hardware information
15. VGA connector (VGA_HDR1)
This connector supports the VGA High Dynamic-Range interface.
16. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.
• We recommend that you connect a high-denition front panel audio module to
this connector to avail of the motherboard’s high-denition audio capability.
• If you want to connect a high-denition front panel audio module to this
connector, set the Front Panel Type item in the BIOS setup to [HD]; if you
want to connect an AC'97 front panel audio module to this connector, set the
item to [AC97]. By default, this connector is set to [HD].
To Next Page
Loading...
