Need help?Do you have a question about the ASUSTOR AS6702T and is the answer not in the manual?
General| Brand | ASUSTOR |
|---|---|
| Model | AS6702T |
| Category | Network Storage Server |
| Language | English |
Device complies with FCC Rules Part 15, subject to two conditions.
CE marking for devices without wireless LAN/Bluetooth.
Handle power sources and adapters safely to prevent damage or injury.
Ensure safe use regarding environment, ventilation, and liquids.
Lists items included for AS6702T, AS6704T, and AS6706T models.
Required tools for installing hard disks, including a screwdriver.
Step-by-step instructions for inserting and securing hard disk drives into the NAS.
Instructions on using a cord bracket to secure the power cord to the NAS.
Steps to connect the NAS to power and network and turn it on.
Important safety and warranty considerations before upgrading system memory.
Lists the necessary tools for performing a memory upgrade.
Procedure to safely remove the NAS cover to access memory slots.
Step-by-step guide for inserting RAM modules into the motherboard slots.
Instructions to reattach the NAS cover after memory installation.
Guidelines for compatibility and safe installation of M.2 SSDs.
Procedure to remove the NAS cover to access M.2 SSD slots.
Step-by-step guide for inserting and securing M.2 SSDs into the slots.
Instructions to reattach the NAS cover after M.2 SSD installation.
Important considerations for installing a 10-Gigabit Ethernet network card.
Lists the necessary tools for installing a network card.
Procedure to remove the NAS cover to access PCIe slots.
Step-by-step guide for installing the network card into the PCIe slot.
Instructions to reattach the NAS cover after network card installation.
Using ASUSTOR Control Center to automatically scan and install NAS software.
Installation instructions for Mac users using ASUSTOR Control Center.
Initializing the NAS via a web browser using its IP address.
Using the AiMaster mobile app to discover and initialize the NAS.
Initializing the NAS directly using its built-in LCD display.
Explanation of the different LED indicators and their states.
Diagrams and descriptions of ports and connectors on the NAS rear panel.
Guide to navigating menus and settings using the NAS LCD panel.
Steps for safely shutting down or putting the NAS into sleep mode.
Troubleshooting steps for when the NAS is not detected by ASUSTOR Control Center.
How firewall settings can affect NAS detection and how to adjust them.
Steps to manually configure IP settings for direct NAS connection.
To Next Page
