GB 12
assembly
4. Secure the telescopic pipe at the right height to the
sidepieces with screws (4).
5. Secure the entire unit to the ceiling bracket (5).
6. Make the plug connection.
7. Connect the discharge duct.
8. Lower the lowermost part of the telescopic pipe onto the
extractor hood.
5
4
6
technical data type number: see data plate in the hood
power supply: 230 V - 50 Hz
connected load: see data plate
dimensions (h x w x d): see "fitting dimensions"
This appliance conforms to current CE guidelines.
88020554_HL_Centrallogic_GB.qxp 21-12-2006 09:28 Pagina GB 12
To Next Page
Loading...
