Need help?Do you have a question about the Atag iC Economiser 35 Plus and is the answer not in the manual?
General| Domestic Hot Water Output | 35kW |
|---|---|
| Efficiency | 94% |
| Modulation | 1:7 |
| Mounting | Wall |
| Fuel | Natural Gas |
| Boiler Type | Combination boiler |
Troubleshooting steps for an absent or faulty outside sensor.
Diagnosing issues with the flow sensor T1 value.
Addresses pump not starting or pressure sensor faults.
Investigating rapid temperature rises and potential sensor faults.
Explains causes for a blank boiler display screen.
Error related to supply temperature change within 1 second.
Faults when flow or return sensors exceed 100°C for 3 seconds.
Troubleshooting low system pressure below 1 bar.
Addresses issues where the pump does not increase pressure.
Communication errors preventing boiler startup.
Error related to supply temperature change within 1 second.
Faults when flow or return sensors exceed 100°C for 3 seconds.
Troubleshooting low system pressure below 1 bar.
Addresses issues where the pump does not increase pressure.
Communication errors preventing boiler startup.
To Next Page
