EN 14EN 14EN 14EN 14
When the appliance is first plugged in, the DISPLAY lights up. After three seconds, the
Clock symbol and “12:00” blink on the DISPLAY.
Setting the Clock
1
Press CLOCK. The “12” starts blinking.
2
Turn the MULTI-FUNCTION SELECTOR
to set the hour.
3
Press CLOCK again. The “00” starts
blinking.
4
Turn the MULTI-FUNCTION SELECTOR
to set the minutes.
5
Press CLOCK again. The clock sets by
itself within 5 seconds.
Note
If you want to change a setting after you have pressed a button, the setting starts blinking. You
can only change this setting during blinking. If it has stopped blinking, you have to press the
button so it will start blinking again.
SETTING THE CLOCK
EN 14
MA4411BUU_EN_130313.indd 14 2013-03-13 �� 3:12:36
To Next Page
Loading...
