EN 29
Replacing the oven lamp
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
The light bulbs (2x) (halogen G9, 230 V, 25 W) are a consumer items
and therefore not covered by warranty. To replace it, first remove the
baking tray, oven rack and guide rails.
Disconnect the appliance from the power supply by removing the
plug from the socket or by switching off the circuit breaker in the
fuse box.
Please note: the light bulb can be very hot! To prevent burns, use
protection to remove the light bulb.
1. Remove the four screws from the cover panel. Remove the cover
panel and glass.
2. Remove the light bulb and install a new one.
3. Do not remove the seal from the cover panel.
The seal should not become lose from the cover panel.
The seal must fit perfectly in the oven wall recess.
CLEANING
To Next Page
Loading...
