Atag One - Connecting ATAG One to Your Network; Smartphone Wi-Fi Setup for ATAG One; Completing the ATAG One Setup Process

4. Go to SETTINGS-WIFI of your smart phone/tablet.
Select ATAG One XXXXX and wait until the check
mark is displayed.
5. Return to One-app:
- Press SEARCH;
- Select: “ONE xx-xx-xxx-xxx”
(xxxxxx is the serie number of the One thermostat)
- Press CONNECT
6. The blue button on the One thermostat will light up
and ask for conrmation.
- Press the blue button to conrm the prompt on the
screen;
7. Go to Settings ( ) on One-app
- Press Service Menu
- Press Set the P-number to check or to enter the
P-number of the connected boiler.
- Press SEND CONTACT INFO to leave behind the
contact information of your company (This is the
company name and phone number you already
entered when you created your account in the portal):
- Press LOGOUT and close the One-app.
- Press the blue button on the One thermostat:
‘Conguration cancelled. Retry?’
SEARCH
CONFIGURE
Device XXX
is trying
to connect. Allow?
YES NO
XX:XX
Settings
Settings for your One
General >
Heating >
Hot water >
Account >
Service Menu >
LOGOUT