EasyManuals Logo

Atag OX4592C User Manual

Atag OX4592C
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
EN 29
General
Try the solutions below if you have problems with your oven. You could save yourself the time
and effort of an unnecessary phone call to customer services.
The food is not cooked
Check whether the timer has been set and you have pressed the ‘start button’.
Close the door properly.
Check whether a fuse has blown and whether a circuit breaker has been activated.
Food is overcooked or undercooked
Check whether the correct cooking time has been set.
Check whether the temperature has been set.
The display will be reset following power failure
Remove the plug from the socket and put it back in again.
Set the time again.
There is condensation on the interior of the oven
This is normal. Wipe the oven clean after use.
The fan keeps working after the oven is switched off
This is normal. Once the oven has been switched off, the cooling fan may continue to run
for a little while.
Air flow can be felt at the door and the exterior of the appliance
This is normal.
Light reflects on the door and the exterior of the appliance
This is normal.
Steam escapes from the door or the vents
This is normal.
Clicking sounds can be heard when the oven is working, particularly in the defrost setting
This is normal.
MALFUNCTIONS
871557_en_naslovnica_drug_papir.indd EN29871557_en_naslovnica_drug_papir.indd EN29 15. 09. 2021 15:02:1015. 09. 2021 15:02:10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag OX4592C and is the answer not in the manual?

Atag OX4592C Specifications

General IconGeneral
BrandAtag
ModelOX4592C
CategoryOven
LanguageEnglish

Related product manuals