Atag VA6311NF - Dishwasher Control Panel Explained; Display and Indicator Symbols

7 Filters
8 Lower spray arm
9 Upper spray arm
Control panel
A
B
C
DE
5 43
2
1
6
1 Display
2 On/off button
3 Indicators
4 Delay start button
5 Programme buttons
6 Function buttons
Indicators
Washing phase indicator. It comes on when the washing and rinsing phases op-
erate.
Drying phase indicator. It comes on when the drying phase operates.
End indicator. It comes on when the washing programme is completed.
Multitab indicator. It comes on when you activate the function.
Salt indicator. It comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispenser.
1)
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
Display
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The washing programme time
23