EasyManuals Logo

Atag VA63211OT User Manual

Atag VA63211OT
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
This appliance complies with the E.E.C.
Directives.
Only for UK and Ireland. The appliance
has a 13 amp mains plug. If it is
necessary to change the fuse in the
mains plug, use fuse: 13 amp ASTA (BS
1362).
Water connection
Make sure not to cause damage to the
water hoses.
Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
The first time you use the appliance,
make sure that there is no leakage.
The water inlet hose has a safety valve
and a sheath with an inner mains cable.
WARNING! Dangerous
voltage.
If the water inlet hose is damaged,
immediately disconnect the mains plug
from the mains socket. Contact the
Authorised Service Centre to replace the
water inlet hose.
Use
Do not sit or stand on the open door.
Dishwasher detergents are dangerous.
Obey the safety instructions on the
detergent packaging.
Do not drink and play with the water in
the appliance.
Do not remove the dishes from the
appliance until the programme is
completed. There can be detergent on
the dishes.
The appliance can release hot steam if
you open the door while a programme
operates.
Do not put flammable products or items
that are wet with flammable products in,
near or on the appliance.
Disposal
WARNING! Risk of injury or
suffocation.
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent
children and pets to get closed in the
appliance.
4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Atag VA63211OT and is the answer not in the manual?

Atag VA63211OT Specifications

General IconGeneral
BrandAtag
ModelVA63211OT
CategoryDishwasher
LanguageEnglish

Related product manuals