EN 17
INSTALLATION
Warning: If the cooker top is made from a material that does not allow
the screws 12c to be inserted, use anamount of silicone to glue the
brackets 7.2 to the top and allow it to dry completely before proceeding
with the installation.
Fixing the Lower Brackets
• Screw the brackets 7.1 to the front of the hood canopy using the
screws 12a provided.
• Before tightening the upper brackets completely, make all the
adjustments to allow them to rest on the lower base of the worktop
to avoid deformation of the upper brackets 7.2 as shown in the figure.
12a
7.1
12a
7.1
To Next Page
Loading...
