GB 7
USE
Operation
Switching the extractor fan on and off
Push the OFF button B.
The extractor fan switches on at the lowest setting.
Push the OFF button B for a minimum of two seconds.
The extractor fan switches off.
Switching the lighting on and off
Push the lighting button A
The lighting switches on.
Push button A again.
The lighting switches off.
Adjusting the speed
Push the +button C.
The extractor fan switches to a higher speed. After speed 3 the
extractor fan switches to the intensive setting.
Timer
Push button D.
The timer is activated. The extractor fan remains switched on at the
chosen setting for 15 minutes, after which it switches off.
Push button D again.
The timer is switched off.
The timer does not work in the intensive setting!
BA C D
To Next Page
Loading...
Need help?
General
