What to do if my Atak 40A700 has no sound?
If your Atak LED TV has no sound, ensure that all connected audio cables are completely inserted. Also, verify that you have selected the correct audio source from your amplifier. The mute function may be enabled, so press the mute button on the remote.
What to do if my Atak 40A700 remote control does not function?
If the remote control for your Atak LED TV isn't working, try replacing the batteries with new ones, ensuring that the battery polarity is correct. Point the remote directly at the TV’s IR receiver.
What to do if my Atak 40A700 LED TV has no picture?
If your Atak LED TV shows no picture, the digital TV channel signal may be weak, so try another channel. Press the INPUT button to verify the desired input is selected. Also, re-connect the antenna or cable wiring.
Why can't my Atak LED TV receive certain channels through the antenna?
If your Atak LED TV cannot receive certain channels, perform a Channel Scan to add channels into the TV tuner memory. Readjust your antenna and retry Auto Channel Scan. The signal from the TV station may be weak in your area.
How to fix video noise or choppy picture on Atak 40A700?
General| Screen Size | 40 inches |
|---|---|
| Display Type | LED |
| Refresh Rate | 60 Hz |
| Smart TV | Yes |
| Built-in Wi-Fi | Yes |
| Resolution | 1920 x 1080 pixels |
| Operating System | Android |
To Next Page
