AT&T 1070 Quick Start Guide

11
Intercom
Use this feature to make calls between system
phones. An intercom call rings at the extension
called with a repeating double-ring pattern.
Make an intercom call with the handset
If the one-touch preference is set to
INTERCOM, skip to step 2.
-OR-
If the one-touch preference is set to
TELEPHONE, press [INTERCOM].
Press the one-touch button for the called
party, then lift the handset. The screen displays
INTERCOM TO and the destination extension
number.
Make an intercom call with the speakerphone
or headset
Use this feature to make an intercom call. With
the handset in the base unit:
If the one-touch preference is set to
INTERCOM, skip to step 2.
-OR-
If the one-touch preference is set to
TELEPHONE, press [INTERCOM]. The phone
automatically turns on the intercom call in
the mode (headset or speakerphone) you
programmed (see the AUTOMATIC MODE
section of your installation guide).
Press the one-touch button. The screen
displays INTERCOM TO and the destination
extension number.
If the extension you called is idle or set to Do
Not Disturb, you hear long beeps. If the other
extension is on a call, you hear a busy signal.
NOTE: The intercom call automatically cancels
if you do not press a one-touch button within
10 seconds.
1.
2.
1.
2.
10:01AM 11/23
EXT 11
INTERCOM TO
PAGE
10:01AM 11/23
EXT 11
INTERCOM TO 12
10:01AM 11/23
EXT 11
INTERCOM TO
PAGE
10:01AM 11/23
EXT 11
INTERCOM TO 12

AT&T 1070 Specifications

General

Lines Supported	1
Speakerphone	Yes
Caller ID	Yes
Display	LCD
Intercom	Yes
Handset Locator	No
Call Waiting	Yes
Volume Control	Yes
Redial	Yes
Power Source	AC Adapter
Type	Corded