To Next PageTo Next Page
Need help?Do you have a question about the AT&T 100 and is the answer not in the manual?
General| Type | Corded |
|---|---|
| Caller ID | Yes |
| Phonebook Capacity | 50 entries |
| Call Waiting | Yes |
| Redial | Yes |
| Volume Control | Yes |
| Power Source | AC power |
Explains the selectable push-button dial mode for tone or rotary service.
Instructions for setting the dial mode switch to tone (TT) or pulse (DP).
Procedure for connecting the telephone line cord to the device and wall jack.
Steps to connect the coiled handset cord to the telephone base and handset.
Guidance on verifying a dial tone after connecting the telephone.
Instructions for setting the dial mode switch to tone (TT) or pulse (DP).
Procedure for connecting the line cord and mounting the telephone onto a wall jack.
Steps to connect the coiled handset cord to the telephone base and handset.
Guidance on verifying a dial tone after connecting the telephone.
Information on adjusting the receiver volume for comfortable listening.
How to redial the last number dialed on the telephone.
Instructions for clearing the last dialed number from memory for privacy.
Guidance on using the Mute function to turn off the handset microphone.
Instructions for setting the ringer volume to OFF, LO, or HI.
How to use tone dialing temporarily with rotary service for specific services.
Solutions for issues where the telephone does not produce a dial tone.
Troubleshooting steps for problems with dialing calls or slow dialing.
Guidance for resolving issues when the telephone does not ring.
General troubleshooting advice and contact information for further assistance.
