Need help?Do you have a question about the AT&T DLC-100 and is the answer not in the manual?
General| Brand | AT&T |
|---|---|
| Model | DLC-100 |
| Category | Controller |
| Language | English |
Device compliance with FCC rules, limits for Class B digital devices, and operating conditions.
States compliance with FCC rules for UL certification, subject to two conditions.
Details government requirements for RF energy exposure limits and important info for radio devices.
Covers power source, grounding, AC overloads, moisture, foreign objects, and service warnings.
Instructs on safe product moving and provides warnings for battery replacement.
Overview of the AT&T Digital Life System, its services, and architecture.
Details the 24x7 UL certified monitoring facilities and their function.
Provides contact information for 24x7 customer care and technical support.
Identifies the key components and features of the Digital Life Controller (DLC-100).
Explains the function of the five system status LIGHTs on the DLC-100.
Step-by-step guide for safely replacing the battery in the DLC-100 controller.
Introduces the SW-ATT-PAD2W keypad, its display, lights, and buttons.
Details system lights, numeric keypad, function buttons, and emergency buttons.
Explains the three primary system states: Ready, Not Ready, and Armed.
Describes the 'Ready to Arm' and 'Not Ready to Arm' states shown on the keypad.
Instructions for arming the system in STAY mode, including exit delay.
Instructions for arming the system in AWAY mode, including exit delay.
How to bypass sensors when arming if a device is in an open state.
Procedure for handling the entry delay when disarming the system.
Steps to disarm the system when it is in Armed-STAY or Armed-AWAY mode.
Procedure to cancel an alarm once it has been triggered and the siren is sounding.
Procedure to manually send a fire emergency alarm via the keypad.
Procedure to manually send an auxiliary emergency alarm via the keypad.
Procedure to manually send a police emergency alarm via the keypad.
Explains how to use the Duress PIN for silent alarm activation.
A summary table of keypad functions and their corresponding actions.
Guide for replacing the batteries in the SW-ATT-PAD2W keypad.
Details the audible sounds made by the keypad and siren for various events.
Continues the table detailing keypad and siren sounds for different operations.
Explains the prioritization of alarm types sent to monitoring centers.
Describes how the keypad indicates and allows silencing of device trouble conditions.
Introduces the SW-ATT-FOB key fob, its functions and battery operation.
Summarizes the functions of the Arm-AWAY, Disarm, Arm-STAY, and Blank buttons.
Step-by-step instructions for replacing the batteries in the key fob.
Lists services provided by technical support, including PIN and timer settings.
Guide to creating or changing the mandatory 4-digit Alarm Panel PIN.
Guide to creating or changing the optional 4-digit Duress PIN.
Information on changing the Entry Delay Timer setting and its function.
Information on changing the Exit Delay Timer setting and its function.
Details the wireless siren's capabilities, sounds, and alarm sequences.
Explains the system status indicated by the siren's LIGHT.
Guide for replacing the batteries in the wireless siren.
Explains the operation, sounds, and indicator lights of the smoke detector.
Guide for replacing the batteries in the smoke detector.
Refers to 'Test Your System' for smoke detector testing instructions.
Provides guidance on maintaining the smoke detector for optimal performance.
Lists safeguards to prevent potentially dangerous fire situations.
Provides instructions on actions to take during a fire event.
Offers advice on preparing family for fire emergencies.
Overview of the CO detector's features, lights, and buttons.
Details the operational characteristics and status indicators of the CO detector.
Guide for replacing the batteries in the carbon monoxide detector.
Guide for replacing the battery in the vanishing door/window sensor.
Refers to 'Test Your System' for testing instructions.
Guide for replacing the battery in the recessed door/window sensor.
Guide for replacing the batteries in the glass break sensor.
Guide for replacing the battery in the motion sensor.
Refers to 'Test Your System' for testing instructions.
Guide for replacing the batteries in the 915MHz repeater.
Guide for replacing the batteries in the 433MHz repeater.
Guide for replacing the batteries in the takeover module.
Allows time to exit home without tripping alarm after arming.
Resets Exit Delay Timer when arming Away/Stay and reentering.
Automatically arms in STAY mode if AWAY is activated without leaving home.
Allows time to enter PIN before alarm sounds when entering armed home.
Time delay before alarm is sent, allowing PIN entry to cancel.
Generates a beep from keypad when an alarm is aborted during Abort Delay.
Generates beeps from keypad when an alarm is cancelled.
Configures logic where multiple zones are interdependent for alarms.
Prevents false alarms by counting and bypassing devices after multiple triggers.
Reduces false alarms by requiring multiple smoke signals before reporting.
Mandatory 4-digit PIN to disarm system or clear alarms.
Optional 4-digit PIN for silent alarm activation when threatened.
Procedure to disarm the system using the Alarm Panel PIN.
Mode for testing system devices, indicated by specific keypad messages.
Sets duration for Test Mode, after which system returns to normal operation.
Recommended weekly testing procedures for the Digital Life System.
Instructions for end-to-end testing of the vanishing door/window sensor.
Instructions for end-to-end testing of the recessed door/window sensor.
Instructions for end-to-end testing of the motion sensor.
Instructions for end-to-end testing of the CO detector.
Instructions for end-to-end and local sensitivity testing of smoke detectors.
Instructions for end-to-end and functional testing of the glass break sensor.
Tests keypad/siren for fire emergency alarm transmission.
Tests keypad for auxiliary emergency alarm transmission.
Tests keypad/siren for police emergency alarm transmission.
Tests outlying 433MHz devices via repeater for alarm transmission.
Tests outlying 915MHz devices via repeater for alarm transmission.
Tests existing wired door/window sensors via the takeover module.
To Next Page
