Carbon Monoxide Detector Features and
Operation
Digital Life User Manual | Page 31 of 62 ATT-UM-V1.1-201303
Always be Prepared
Practice the following steps to prepare you and your family in the event of a fire:
• Perform fire drills regularly. Use them to assure recognition of an alarm signal.
• Draw a floor plan and show two exits from each room. It is important that children
be instructed carefully, because they tend to hide in times of crisis.
• Establish one meeting place outside the home. Insist that everyone meet there
during an alarm. This will eliminate the tragedy of someone reentering the house
for a missing member who is actually safe.
If you have children and/or physically challenged people residing in your household, use
window decals to help emergency personnel identify the sleeping quarters of these
individuals.
WARNING! Smoke alarms CANNOT provide warnings for fires resulting from
explosions, smoking in bed or other furniture, ignition of flammable liquids, vapors and
gases, children playing with matches or lighters.
Carbon Monoxide Detector Features and Operation
Your Carbon Monoxide (CO) Detector (SW-ATT-CO) monitors the levels of CO gas and
gives early warning when potentially dangerous levels exist. The CO detector has two
LIGHTs, one alarm sounder and one Test/Hush button on the front panel, as shown:
.
WARNING! Your Carbon Monoxide Detectors (SW-ATT-CO) are not smoke detectors.
Carbon monoxide detectors will not sense smoke, fire, or any poisonous gas other than
carbon monoxide even though carbon monoxide can be generated by fire. You must
install smoke sensors to provide early warning of fire and to protect you and your family
from fire and its related hazards.
To Next Page
Loading...
Need help?
General
