Vanishing Door/Window Sensor Features and
Operation
Digital Life User Manual | Page 35 of 62 ATT-UM-V1.1-201303
Vanishing Door/Window Sensor Features and Operation
Your Vanishing Door/Window Sensor (SW-ATT-V2) is a fully monitored sensor that is
designed to be installed on most doors or windows. The vanishing door/window sensor
transmits intrusion alarm information to the DLC-100.
Replacing the Vanishing Door/Window Sensor (SW-ATT-V2) Battery
CAUTION: Opening the battery compartment door when the system is armed triggers
the transmission of a tamper alarm to the AT&T Digital Life Central Monitoring Center.
Therefore, in order to prevent a false alarm, please ensure that the system is disarmed
prior to opening the battery compartment door to replace the battery.
You can replace the 3V CR2032 lithium battery (Panasonic
®
CR-2032L/BN, Maxell
®
CR2032, Sony
®
CR2032) by removing the cover and inserting the battery with the
positive (+) side up. The vanishing door/window sensor requires one 3V CR2032 lithium
battery.
NOTE: The Vanishing Door/Window Sensor (SW-ATT-V2) includes low battery
reporting. When the system indicates a low battery condition, replace the battery.
Testing the Vanishing Door/Window Sensor (SW-ATT-V2)
See the Test Your System section for instructions concerning testing your Vanishing
Door/Window Sensor(s) (SW-ATT-V2).
To Next Page
Loading...
Need help?
General
