Keypad Features and Operation
Digital Life User Manual | Page 18 of 62 ATT-UM-V1.1-201303
Entering Your Duress PIN
You can call a Digital Life Customer Care Technical Support agent to assist you in
creating or changing your optional four (4) digit Duress PIN or you can access
www.att.com/dlpin (See Digital Life Customer Care Technical Support).
A duress signal is sent to the AT&T Digital Life Central Monitoring Center by you
entering your Duress PIN on the keypad when you feel threatened due to one, or
more, person(s) trying to force you to enter or re-enter your home. After receiving the
Duress Alarm, an agent will place a call to the police and report the Duress Alarm.
The Duress PIN can be entered at any time. Entering the Duress PIN generates a
silent alarm. The siren will not sound and there will be no indication on the display
that the Duress PIN has been entered.
Keypad Operation Quick Reference
FEATURE OPERATION
STAY
Press STAY to Arm-STAY
AWAY
Press AWAY to Arm-AWAY
BYPASS
Press STAY or AWAY then BYPASS
Disarm
Enter four (4) digit Alarm Panel PIN
Duress
Enter four (4) digit Duress PIN
Fire Emergency
Press then asterisk (*) when prompted
Auxiliary Emergency
Press then asterisk (*) when prompted
Police Emergency
Press then asterisk (*) when prompted
Replacing the Keypad (SW-ATT-PAD2W) Batteries
Your Keypad (SW-ATT-PAD2W) requires four (4) AA alkaline batteries (Duracell
®
MN1500, Energizer
®
EN91, or Panasonic
®
LR6XWA) for 24 hour battery backup and will
indicate when it is time to replace the batteries, by producing a chirping sound and
displaying the following message on the LCD, “Keypad - Low Battery.”
CAUTION: Opening the battery compartment door when the system is armed triggers
the transmission of a tamper alarm to the AT&T Digital Life Central Monitoring Center.
Therefore, in order to prevent a false alarm, please ensure that the system is disarmed
prior to opening the battery compartment door to replace the batteries.
To Next Page
Loading...
Need help?
General
