AT&T DLC-100 User Manual

CP-01-2010 Supported Features for False Alarm
Reduction
Digital Life User Manual | Page 48 of 62 ATT-UM-V1.1-201303
CP-01-2010 Supported Features for False Alarm Reduction
The “Control Panel Standards – Features for False Alarm Reduction” standard was developed
and adopted by a consensus of industry volunteers in accordance with the Security Industry
Association (SIA) standards development policies and procedures. The standard is intended to
reduce false alarms with security systems. The standard is called ANSI/SIA CP-01. The most
recent version of the standard is ANSI/SIA CP-01-2010, which was established in 2010. The
standard generally specifies the design for controls of security alarm systems at the control
panel. The specifications focus on the system arming and disarming process where many false
alarms are generated.
The following table includes the CP-01-2010 features that are supported in your Digital Life
System. It includes feature descriptions and default feature settings.
Digital Life
Feature
Name
CP-01
Feature
Name Settings
Default
Setting Feature Description
Exit Delay
Timer
Exit Time Forty-five (45) to
one hundred and
twenty (120)
seconds interval
Sixty (60)
second
interval
After arming your system, the Exit
Delay Timer feature allows you
sufficient time to exit your home
without tripping an alarm.
Exit Time
Restart
Exit Time
Restart
Enabled/Disabled Enabled The Exit Time Restart feature resets
the Exit Delay Timer when you are
arming Away/Stay and leave and
reenter your home. This provides
you more time to leave again. This
restart only occurs one (1) time.
Auto Stay
Arm on
Unvacated
Premises
Auto Stay Arm
on Unvacated
Premises
Enabled/Disabled Enabled When the Auto Stay on Unvacated
Premises feature is enabled and you
activate the Armed- AWAY mode
using the keypad, but do not leave
your home, then the system will
automatically be armed in the
Armed-STAY mode rather than the
Armed-AWAY mode.
Entry Delay
Timer
Entry Delay Enabled/Disabled
with a range of
thirty (30) to two
hundred and
forty (240)
seconds interval
Enabled
with thirty
(30)
second
delay
interval
When entering your home while the
system is armed, the Entry Delay
Timer feature allows you sufficient
time to get to a keypad and enter
your Alarm Panel PIN before the
system sounds an alarm.

AT&T DLC-100 Specifications

General

Brand	AT&T
Model	DLC-100
Category	Controller
Language	English