Takeover Module Features and Operation
Digital Life User Manual | Page 46 of 62 ATT-UM-V1.1-201303
Takeover Module Features and Operation
When Digital Life installations are performed in locations with existing wired security
systems, a Takeover Module (SW-ATT-TAKRF) may be utilized to re-use the existing
wired door/window sensors and provide power to wireless keypads.
In most installations, the Takeover Module (SW-ATT-TAKRF) will be installed adjacent
to the DLC-100, but in some installations it may be installed in a different location in the
home. All of the zones in the takeover module act as supervised wireless zones in the
Digital Life System. In existing wired security systems the wired door/window sensors
are organized into “Zones” containing multiple door/window sensors. The takeover
module enables the DLC-100 to be able to takeover the monitoring of the existing zones
of wired door/window sensors.
The Takeover Module (SW-ATT-TAKRF) is equipped with a green LIGHT on the front
surface of the unit. The green LIGHT is solid when batteries are fully or partially charged.
The green LIGHT flashes when the batteries are low. The green light is off when the unit
is not powered.
To Next Page
Loading...
Need help?
General
