Siren Features and Operation
Digital Life User Manual | Page 26 of 62 ATT-UM-V1.1-201303
Changing the Exit Delay Timer
A Digital Life Customer Care Technical Support agent can assist you in changing your
Exit Delay Timer Interval. The default setting is sixty (60) seconds. You have a range of
sixty (60) seconds to two minutes (120 seconds) for your Exit Delay Timer Interval
setting.
After arming your system, the Exit Delay Timer Interval feature allows you sufficient time
to exit your home without tripping an alarm.
Siren Features and Operation
Your wireless Siren (SW-ATT-SRN) is capable of generating alarms sounds and chirps.
It is controlled by the DLC-100. It receives commands from the controller and generates
tones and pre-programmed alarm sequences through its speaker.
When a smoke alarm is activated the Siren (SW-ATT-SRN) will sound three short beeps
then silence repeating. When a carbon monoxide alarm is activated the siren will sound
four short beeps then silence repeating In addition the siren beeps during an intrusion
alarm.
To Next Page
Loading...
Need help?
General
